Electrical maintenance and repair EEC 226

ENUMERATE 5 (FIVE) MAINTENANCE PROCESSES OF ELECTRIC KETTLE AND THREE [3] PRECAUTION TO BE TAKEN WHEN REPLACING CAPACITOR IN A CIRCUIT. (5 marks)

EEC 226 [ ELECTRICAL MAINTENANCE AND REPAIR]ENUMERATE 5 (FIVE) MAINTENANCE PROCESSES OF ELECTRIC KETTLE (5 marks)

  1. Never connect empty kettle to mains supply. Put enough water.
  2. At the time of repairing, disconnect it from main supply.
  3. When using water must not enter because short circuit, earth or leakage fault may occur.
  4. Avoid using broken cord or naked cord connected.
  5. Endeavor electric kettle is put off,
    when it job is completed.

STATE THREE [3] PRECAUTION TO BE TAKEN WHEN REPLACING CAPACITOR IN A CIRCUIT.

  1. Be sure the new leads are the same length with as the old ones.
  2. Use a heat sink between the capacitor and the soldered joint.
  3. Install capacitor of the specified voltage rating or a higher voltage rating, installing a lower rating is asking for trouble.
  4. Make sure the new capacitors is soldered in places in the same way as the old ones when installed.

Get more on this new channel: emperor tutorial

https://youtube.com/channel/UC54N4VE0RrjjIkz

Oluwamuyide Peter

My name is seyi, the main aim of creating this platform is to help users get information like school updates, electrical engineering topics, school project and many more for free

Related Articles

Leave a Reply

Back to top button