Key learnings
- Open-circuit voltage (OCV) is the voltage measured between two terminals when no external load is connected across them.
- In a linear circuit, the open-circuit voltage at a pair of terminals is the Thevenin voltage for those same terminals.
- An open external circuit has no current flowing through the disconnected load, although current may still flow inside other parts of the circuit.
- OCV can be measured with a voltmeter across the open terminals. A real meter draws a tiny amount of current, so the measurement is an approximation of a perfect open circuit.
- Battery OCV depends on chemistry, temperature, state of charge and measurement conditions. A single voltage reading does not always determine battery health.
- A solar cell’s open-circuit voltage is measured when its output current is zero. It depends on illumination and cell temperature.
What is open-circuit voltage?
When a load is disconnected from a pair of terminals, the voltage measured across those terminals is called the open-circuit voltage. It is commonly written as VOC or VOC.
For a linear circuit viewed from a pair of output terminals, this voltage is also the Thevenin voltage:
V_{\text{OC}} = V_{\text{Th}}
This means the two quantities refer to the same terminal voltage in the Thevenin equivalent model. It does not mean that the open-circuit voltage of every physical source is always equal to its rated or nominal voltage.
An ideal voltmeter has infinite resistance and draws no current. A real voltmeter has very high, but finite, input resistance, so it draws a very small current while measuring.
What happens in an open circuit?
An open circuit is a break in a path that prevents current from passing through that path. If a load is disconnected from the output terminals, the external load current is zero:
I_{\text{load}} = 0
The voltage can still be present across the open terminals. A battery, for example, maintains a potential difference between its positive and negative terminals even when nothing is connected to them.
An open output does not necessarily mean that current is zero everywhere inside the circuit. Other branches or internal components may still carry current. The statement “no current flows” applies to the disconnected load path.
Finding open-circuit voltage with circuit analysis
To find the open-circuit voltage:
- Identify the two terminals where the load has been disconnected.
- Remove the load from the circuit model.
- Calculate the voltage between the open terminals, keeping the rest of the circuit connected.
- Use circuit laws such as Ohm’s law, Kirchhoff’s voltage law, or a voltage-divider relationship.
Do not automatically remove every component near the open terminals. Only the disconnected load branch has zero current. Components elsewhere in the circuit may still affect the terminal voltage.
Worked example: an open output on a voltage divider
A 12 V source is connected to two resistors in series: R1 = 4 kΩ and R2 = 2 kΩ. The output terminals are across R2, and the external load is disconnected. Find the open-circuit voltage.
The divider output is:
V_{\text{OC}} = V_{\text{in}}\frac{R_2}{R_1+R_2}
Substitute the values:
V_{\text{OC}} = 12\ \text{V}\times\frac{2\ \text{k}\Omega}{4\ \text{k}\Omega+2\ \text{k}\Omega} = 4\ \text{V}
The open-circuit voltage across the output terminals is 4 V.
Current still flows through R1 and R2; only the disconnected external load has zero current.
Thevenin voltage and output resistance
A linear circuit seen from two terminals can be represented by a Thevenin equivalent: an ideal voltage source in series with a resistance. The ideal source value is the open-circuit voltage, and the series resistance is the Thevenin resistance.
For the divider in the example, the Thevenin resistance is found by replacing the independent ideal voltage source with a short circuit and looking into the output terminals:
R_{\text{Th}} = R_1 \parallel R_2
R_{\text{Th}} = \frac{R_1R_2}{R_1+R_2} = \frac{(4\ \text{k}\Omega)(2\ \text{k}\Omega)}{4\ \text{k}\Omega+2\ \text{k}\Omega} \approx 1.33\ \text{k}\Omega
The circuit’s Thevenin equivalent is therefore a 4 V source in series with approximately 1.33 kΩ.
If a 4 kΩ load is connected, the load voltage becomes:
V_{\text{load}} = V_{\text{Th}}\frac{R_{\text{load}}}{R_{\text{Th}}+R_{\text{load}}}
V_{\text{load}} = 4\ \text{V}\times\frac{4\ \text{k}\Omega}{1.33\ \text{k}\Omega+4\ \text{k}\Omega} \approx 3.0\ \text{V}
The load voltage is lower than the 4 V open-circuit voltage because the load and Thevenin resistance form a voltage divider.
Measuring open-circuit voltage
A digital multimeter can measure OCV by measuring across the two terminals while no external load is connected.
For a battery:
- Disconnect the battery from the circuit if the procedure allows.
- Set the multimeter to DC voltage and choose a range above the expected voltage, if the meter is not autoranging.
- Connect the black lead to
COMand the red lead to the voltage input. - Place the probes across the battery terminals: red to positive and black to negative.
- Read the voltage and compare it with the manufacturer’s guidance for that battery type and test condition.
For a circuit output, place the probes across the two open output terminals. The multimeter is connected in parallel with those terminals.
Use a meter rated for the voltage and environment. Do not use the current input when measuring voltage. Follow the meter’s manual and suitable electrical-safety practices.
Open-circuit voltage of a battery
A battery’s open-circuit voltage is measured when it is not supplying an external load. It can provide useful information, but the result depends on the battery chemistry and measurement conditions, including:
- State of charge
- Temperature
- Time since charging or discharging
- Battery age and condition
- The manufacturer’s specified measurement procedure
For some rechargeable battery chemistries, a rested OCV can help estimate state of charge using the manufacturer’s tables or battery-management guidance. That estimate is not universal. A low reading alone does not prove that a battery is damaged, and a normal OCV does not prove that it can deliver its rated capacity or current.
To evaluate battery condition, use the test recommended for that battery—this may include a capacity test, load test, impedance test, or battery-management-system diagnostics.
Open-circuit voltage of a solar cell
For a solar cell, the open-circuit voltage is the voltage across its output when the external current is zero. It is commonly written as VOC. It is one point on the cell’s current-voltage (I–V) curve.
In a simplified single-diode model, ignoring series and shunt resistance, the open-circuit voltage is approximated by:
V_{\text{OC}} \approx \frac{nkT}{q}\ln\left(\frac{I_{\text{L}}}{I_0}+1\right)
where:
nis the diode ideality factor.kis Boltzmann’s constant.Tis the cell temperature in kelvin.qis the elementary charge.ILis the light-generated current.I0is the diode reverse-saturation current.
This simplified equation shows that solar-cell OCV depends on illumination and temperature, among other cell properties. In silicon cells, the saturation current rises strongly with temperature, so the open-circuit voltage generally decreases as the cell gets hotter, even though temperature also appears in the equation’s leading factor. Actual cell behavior is more complex than the simplified equation. NREL photovoltaic model documentation
A panel’s OCV is not the same as its voltage at the maximum-power operating point. In a working solar system, the voltage depends on the load and the controller or inverter.
Why is voltage not zero in an open circuit?
Voltage is a potential difference between two points. It can exist without a complete path for current.
For example, a battery maintains different electric potentials at its terminals. Disconnecting a load stops current from flowing through that load, but it does not immediately remove the battery’s terminal voltage. The meter detects the potential difference while drawing only a very small current.
Estimating source resistance from two readings
Suppose a low-voltage source reads 5.0 V with no load and 4.5 V across a 90 Ω test load. The load draws 50 mA, and the terminal voltage drops by 0.5 V. The estimated output resistance is R_{\mathrm{th}}=0.5\,\text{V}/0.050\,\text{A}=10\,\Omega. This estimate describes the circuit near the tested operating point. A regulated source entering current limit can behave differently.
Common mistakes to avoid
- Assuming an open circuit has zero voltage. An open path prevents load current; it does not necessarily eliminate the voltage between terminals.
- Assuming current is zero throughout the entire circuit. Current may still flow through other connected branches.
- Treating OCV as the same as rated voltage. A source’s nominal rating and its measured open-circuit voltage are not always identical.
- Assuming a battery’s OCV proves its health. A battery may show a reasonable voltage but still perform poorly under load.
- Assuming solar-cell OCV is constant. It changes with conditions such as light level and cell temperature.
- Using a current-mode meter to measure voltage. Use the voltage function and the correct meter inputs.
- Forgetting that a real voltmeter draws some current. Its high input resistance makes this current small, but not exactly zero.
Conclusion
Open-circuit voltage is the voltage between two terminals when no external load is connected across them. For a linear circuit viewed from those terminals, it is the Thevenin voltage. The open load current is zero, but other parts of the circuit may still carry current.
OCV measurements are useful for circuits, batteries and solar cells, but they must be interpreted in context. A battery’s chemistry and test conditions matter, while a solar cell’s voltage varies with illumination and temperature. When measuring, use the multimeter’s voltage setting and compare the result with the relevant manufacturer guidance.
